H2R Electronics

The KBPC3510 is a single-phase Bridge Rectifier with diffused junction and metal case. Low Power Loss and High Efficiency

The KBPC5010 is one massive bridge rectifier! Bridge rectifiers are used to convert alternating current (AC) to direct current (DC). They are constructed from at least 4 diodes and are a major component of most basic AC/DC power supplies. This specific bridge rectifier can handle up to 50A and a peak reverse voltage of up to 1000V. The metal casing has a hole in the middle – ideal for mounting it.

The rectifier measures 28.9 x 28.5 x 22mm overall and features 0.250″ quick disconnects. To use this part simply connect your positive DC line to the “+”, the negative/ground to the “-”, and each of the AC lines to one of the “AC” Pins.

 Features:

 

1. Diffused Junction
2. Low Reverse Leakage Current
3. Low Power Loss, High Efficiency
4. Electrically Isolated Metal Case for Maximum Heat Dissipation
5. Case to Terminal Isolation Voltage 2500
6. Dimensions (Overall): 28.9 x 28.5 x 22mm
7. Peak Average Current: 50A
8. Reverse Voltage (Max): 1000V

A Single Phase Bridge Rectifier is the GBJ5010. This IC can be utilised for a variety of applications because its maximum input AC RMS voltage is 700V. This IC can withstand a maximum average current of about 50A. This IC features a low forward voltage loss of 1.1V and a reverse breakdown value of 1000V. It is highly efficient and can handle 400 A of surge current. This can be a decent option if you're seeking for a small IC for rectification applications.
The uninterruptible power supply, led and LCD TVs, audio amplifiers, and radios are the principal applications for this single phase bridge rectifier.

Features

• Rating to 1000V PRV
• Ideal for printed circuit board
• Low forward voltage drop, high current capability
• Reliable low cost construction utilizing molded plastic  technique results in inexpensive product

Specification

The GBU810 is a bridge rectifier diode, specifically a single-phase, 8-amp, 1000-volt (1kV) device. It's commonly used for converting AC voltage to DC voltage in various electronic circuits. The "SEP" likely refers to SEP Semiconductor, a manufacturer of electronic components, including this bridge rectifier. 

Single Phase Diode Bridge Rectifier KBPC5010 AS ENERGITM is a bridge rectifier circuit of four diodes that is used in the process of converting alternating current. If the KBPC5010 series diode bridge has a "W" at the end of the marking, the leads are wired. Output current IO – 50 ampere, output voltage VRRM – 1000V. The housing of the KBPC5010 or KBPC5010W diode bridge is metal, all components are electrically insulated with epoxy resin (solid casting in a single capsule). Epoxy resin is characterized as a material with a high level of flame resistance. An alternating current is fed to the input "~" of the circuit. In each of the half - periods the input current passes only through two diodes. As a result, at the output "+" and "-" we get a current pulsing at twice the frequency of the input current. When operating at high currents, it is always recommended to install the KBPC5010 diode bridge together with a heat sink (heatsink, cooler) to maintain an optimal thermal operating mode. In the central part of the housing the manufacturer has already provided a through hole specifically for mounting. Features of Single Phase Diode Bridges KBPC 5010, KBPC 5010W: low on-state losses; high reverse voltage and high current handling capabilities; easy chassis mounting; high surge current. Their main applications are: rectifier for power supplies; input rectifier for variable frequency drives; rectifier for dc motor field supplies; battery charger rectifiers; power regulators

GBU2510 is a 25A/1000V glass-passivated bridge rectifier designed with a low forward voltage (VF) drop in a GBU-2 package, UL approval. Its exceptional heat dissipation capability renders it ideal for applications demanding substantial current and high-power components.

• Package

   

  GBU-2

• Voltage

   

  1000V

• Current

   

  25A

• I_FSM

   

  350A

• I_R

   

  5uA

• Application

  • TV
  • Server Power
  • Gaming Console Power
  • Desktop Power

•  

The KBPC3508 is a 35A, 800V single-phase bridge rectifier designed to convert alternating current (AC) to direct current (DC). It's commonly used in power supplies and other electronic circuits where DC power is needed from an AC source. The KBPC3508 features a compact design with a metal case and epoxy encapsulation, providing electrical insulation and flame resistance. Key features and specifications:

• Current Rating: 35 Amperes (A). 
• Voltage Rating: 800 Volts (V). 
• Diode Type: Bridge rectifier, consisting of four diodes arranged in a bridge configuration. 
• Function: Converts AC input voltage to pulsating DC output voltage. 
• Mounting: Through-hole mounting, typically with a dedicated hole in the center of the case for heatsink attachment. 
• Package: Metal case with epoxy encapsulation, providing electrical insulation. 
• Applications: Power supplies, industrial equipment, and other electronic circuits requiring DC power from an AC source. 

How it works:A bridge rectifier uses four diodes to convert AC input to DC output. In each half-cycle of the AC input, two diodes conduct current, creating a pulsating DC waveform at the output. This pulsating DC voltage can then be smoothed by a filter circuit to produce a more stable DC voltage. Important considerations:

• Heat Dissipation:The KBPC3508 can generate significant heat, especially when operating at high currents. It's crucial to use a heatsink to maintain optimal thermal performance and prevent damage. 
• Peak Repetitive Reverse Voltage (VRRM):The KBPC3508 has a maximum peak repetitive reverse voltage rating of 800V, which should not be exceeded. 
• orward Voltage Drop:Each diode in the bridge has a forward voltage drop, which can affect the overall efficiency of the rectifier circuit. 
• Repetitive peak forward current:The KBPC3508 can withstand a repetitive peak forward current of 400A. 

The KBPC3512 is a single-phase bridge rectifier, a type of electronic component that converts alternating current (AC) into direct current (DC). It uses four diodes connected in a specific configuration to achieve this conversion. The KBPC3512 is rated for 35 amps of forward current and 1200 volts of reverse voltage. 

• It takes an AC input and provides a pulsating DC output. The frequency of the pulsating DC is twice the frequency of the input AC. 
• Construction:The KBPC3512 is typically housed in a rectangular package, often with a metal base for heat dissipation, and is fully encapsulated in epoxy resin for electrical insulation and protection. 

BRIDGE RECT 1P 1.6KV 35A SKBPC

The 35SB80 is a single-phase bridge rectifier, capable of handling 35 amps and 800 volts. It is used to convert alternating current (AC) into direct current (DC) by rectifying both halves of the AC waveform. This component is commonly found in various electronic applications, including power supplies, motor drives, and industrial controls. Key Features and Specifications:

• Current Rating: 35 Amps.
• Voltage Rating: 800 Volts.
• Configuration: Single-phase bridge rectifier.
• Function: Converts AC to DC by rectifying both halves of the AC waveform.
• Applications: Power supplies, motor drives, industrial controls, etc.
• Package: Typically a through-hole component.
• Material: Often constructed with glass passivated chip junctions for improved reliability and thermal conductivity.